How to Build a Shed Roof Design

In building your shed, it is very important to remember that the roof design needs to be well designed and well constructed so that it can handle the heavy loads from wind and snow. You want to be certain it will hold up well to properly protect your contents for years of use.

I always recommend that you purchase a good set of shed plans and make certain that the roof design meets the code requirements for your area. Once you check that out, head to the local lumber yard and have them fabricate your roof trusses. Once the roof trusses are delivered, take a pencil and place a mark on the top of your shed every 24″ to designate where the truss should be mounted. Take the first truss and center it on the first mark and nail it into place. Repeat for the remaining marks.

Most roof design specify 5/8″ plywood panels to cover the roof. Nail them to the trusses. Then cover with tar paper and asphalt shingles. It is advisable to complete these steps during a calm day since a gusty wind can make the job much more difficult and dangerous.

If you live in a snowy climate, the pitch of the roof should be sufficient to enhance the snow slide off. If too much snow accumulates on the roof, it will place undue stress on the structure and possibly damage it.

When you shingle the roof, use a high quality product with a 20 year warranty and purchase a color which blends well with your other structures. It may even be required if you live in a community governed by a homeowners association. It is therefore wise to check this out before you start to build. Don’t learn this lesson the hard way.

How to Choose a Roof Design for Your Home

If you are a homeowner who is thinking about rebuilding their home, up to one zone that you must consider to focus on as long as your house’s revision project is the roof of your house.

With the roof as one of the most prominent parts of your house, it is an idea if you want to sort out the best roof design to make your house as attractive and friendly as possible.

Each house revision project can be a daunting task when you first start, and the roof is no exception. There are many different things that need to be considered when the owner of the house sort out the roof design that wants to play a role like the ultimate achievement of their home revision project.

The two main parts of the roof project that need to be considered are the shape of the roof and the material used to make the roof. Some of the more well-known forms in the house owner class include gambrel roofs, gable roofs and flat roofs, while the well-known materials are listed substances such as copper, asphalt and wood.

Both form and material have advantages and disadvantages attached, and that is something you want to remember when you shop. For example: wood shingles look good but are rather large maintenance, and a flat roof that is cheap but requires constant maintenance due to factors such as the weather.

Depending on what your plans for your roof design are, you can think of a number of different mixes to suit your individual tastes, but your decision about what the final design will depend on is more than just what you like. The final design must be instant for your zone.

However, to initiate ideas for what you want so that your roof looks like you look around your own area. You should not have trouble creating another house nearby that has a roof that you like. Gaining inspiration from those next to you and incorporating it into your own project can produce uniformity that will increase the aesthetic value for your community.

After you know exactly what you want to go through, the next step is to hire a contractor to carry out the work.

Back to relying on your area, if you really use the house of the next door person like inspiration for your own roof design plan, so you can ask them if they use a contractor to get the roof of their house the way they want. Word of mouth is a solid and easy method for creating a leading contracting industry that is capable of carrying out the type of work you want.

If you create someone who you might want to do the job for, look at their portfolio for examples of work. This is also good inspiration for getting assessed after you created someone who might want you to rent. Carrying out the subject will give you a reflection of what you are trying to do, how the matter is about to be tried, how long the work is going to take, and can be very meaningful, at what cost.

Communication with your contractor is meaningful. Whoever you employ, they must be able to overcome what problems you also have to help make your home’s revised vision a reality.

A Roof – Function, Design, Preservation

Generally, in the uppermost part of a building is completed by a cover called roof. This part of building has high point looked from function, design and preservation things. Then, these three points of view becomes the consideration of people in applying it in their house.

Start from the function, roof functions as cover that protect the living creature that is living in the certain building. It keeps these living creatures from many things, such as from the consequence of weather. If people live in tropical climate, they tend to choose the type of it that can protect you from sunlight, wind and water in rainy season. The material chosen is different with in subtropical and cool climate. Therefore, the climate has huge influence in choosing it.

There are some kinds of roof design that can be alternative for you in applying it such as gable, hip, gambrel, and mansard, also flat and shed. The architecture of these types is the most popular. Looked from efficiency in the cost, gable roof is the most efficient between others. Therefore, the design also becomes one of considerations for people in choosing the type of cover for their house.

No roof lasts eternally though the installation is perfect. Some elements like sun, rain, hail and wind can reduce the resistance of the roof, therefore it must be replaced. The performance is one of important thing should be noted. Such as by painting, it can increase the performance of your roof. Placing of some devices that are usually placed surrounded the roof, such as the pipe, satellite or skylight also must consider the condition of the roof. The last, check the condition of your roof regularly to prevent any damages broke your roof.

The material of a roof offers many options for people in applying one type of roof. Wheaten straw, banana leaves, sea grass, aluminum or hay are just a few examples of roof. Hay material has special form that becomes attractive choice.

Guidelines for Sifting Roofing Materials – Types of Roof Covering Materials

We discussed the alibi behind the selection of various roofing materials, in this paper we will cover different types of roof covering materials itself.

1. Palm fiber and reeds

If you have time to go to Bali, of course you want to hear it very often with the fibers which are used in traditional Balinese architecture. You may use this type of roof if you want to make buildings with traditional or vernacular nuances. Palm fiber roof made of palm fibers. The fibers are used like a roof covering materials with a braid built as far as 120 centimeters and a diameter of 6cm. The braid is clamped with bamboo blades, then tied to battens. The composition of the 2-layer minimum fibers continues to be thick layers want to continue to be long-lasting energy. Good quality palm roof can reach the age of up to 30 years.

2. The thatched roof covering materials

The thatched roof is made from thatched leaves which are arranged together in a comb and then tied to a stick or bamboo which acts as a batten every 20 centimeters. The thatched roof only has a near-3-4 year endurance energy. Both palm fiber and roof have the most important advantages in the aesthetic aspect and traditional feel. The disadvantages are the availability of good quality materials on the market, a slightly complicated installation system, and relatively short life (for thatch roof covering materials).

3. Roof Shingles

Shingles on the market are made from 2 types of ingredients. Natural shingles made from wood and artificial shingles made from fibercement. Wood shingles are made from durable grade wood which is straight fibrous, flexible with wood and cracked. There is a small wooden shingle with a length of 50-60cm, a width of 7-10cm, a thickness of 1- 3cm, and a large wooden shingle in the form of a board with a length of 40- 93cm, a width of 10-47cm, a thickness of 3-5mm. Instead artificial shingles made from fiber-cement material come in various dimensions. The method of installing natural shingles and artificial shingles is almost the same. Shingles were installed alternately of 2, 3 or 4 layers nailed to battens. There are also traditional shingles made from split bamboo, then cut as far as 40cm and sharpened edges. Shingles are widely used for buildings in the colonial style.

Not only that, as already discussed at the beginning, the shingle roof has the advantage of being able to be mounted on a roof with an angle that is almost vertical. The drawback is the paid aspect. Natural shingles are quite expensive because they must be made of good quality wood.

4. Asbestos roof

Asbestos is often used for low-cost buildings. Not only because the price of the material is cheap. Asbestos roof also requires a roof frame that is less frequent. Asbestos is directly attached to the recording, so it doesn’t need a rake and batten.

Asbestos comes in 2 types, namely asbestos asbestos and asbestos as small waves. For large asbestos waves, the dimensions are length 100, 125, 150, 180, 210, 240, 270, 300cm, with a width of 108cm. For asbestos large waves, overlapping the connection at the end is 25cm, and 8 centimeters at the edge. For small asbestos waves, the dimensions are 150, 180, 210, 240, 270, 300cm with a width of 105cm. For small asbestos waves, the overlap of the connection at the end is 25cm and 7, 5cm at the edges.

5. Zinc and Aluminum roof

Wave zinc roof wave exists in the dimensions 183 x 76cm, on the contrary the aluminum roof wave is in the dimensions 200 x 83, 6cm with a thickness of 0. 5, 0. 7, 0. 8, or 1. 0 millimeters. When installed requires overlap of 20cm in the long, and 11, 4 centimeters in the edges.

6. Metaldeck roof

This type of roof has many names on the market, namely spandek, bondek, trimdek, kliplok, to galvalum and zincalume which are actually more towards the name of the type of constituent material. Metal roof decks are commonly used for buildings with wide roof spans, such as factories, supermarkets, etc. Available in widths from 600mm to 1000mm with various types of surface profiles. The length is generally almost unlimited, because the supplier of this material can directly bring a car that is loaded with roll material to the project position.

Asbestos, zinc, aluminum and metaldeck roofs have almost the same personality. The surplus is a cost-effective and light construction burden. But the drawbacks are pretty much too, the beginning is an aesthetic aspect. Asbestos and zinc have already been synonymous with homes for the less able.

The second is an asbestos roof and all metal-based roofs have the character of transmitting fairly large solar heat radiation to the room below. Another weakness is the metal material would be noisy when hit by rain.

Asbestos itself is pretty much avoided, because the particles are predicted carcinogenic behavior, is causing cancer. To overcome the weaknesses of these various types of roofing sheets, the type of roof made from cellulose bitumen was born.

Not only that at this time there is also a uniform asbestos wave material asbestos free (cancer-causing particles) made from fibercement material. The contents of cement in this type of material bring out the characteristics of a material that is waterproof, sturdy, and has a pretty good heat insulation.

7. Cellulose Bitumen Roof

This type of roofing material, made from cellulose fiber, bitumen, and resin, has various advantages. This roof is flexible, making it easy to build, accustoms the shape of the roof, light weight so it does not overload the construction of the building, good heat insulation because of the characteristics of its constituent materials, not noisy when it is overwritten, and has quite a lot of alteration patterns.

Are there any weaknesses? There certainly is, is relatively more expensive than other types of sheet roofs. There are sheets with molds in the form of a kind of tile or asbestos waves with various patterns.

Wow, in fact there are also many types of roof covering materials, huh? In the next article which is the last part of the discussion of roof covering material, we will discuss various types of roof cover material that are very well-known.

Theme BCF By aThemeArt - Proudly powered by WordPress .
BACK TO TOP